Drafty Homes that naturally leak lots of cold air never need intentional ventilation because enough fresh air comes inside on its own

Are your windows getting wet from condensation again? Now’s the time to do something about it.

Every year with cooler outdoor temperatures windows across Canada get wet from condensation on interior surfaces. The degree of wetness ranges from insignificant to downright debilitating, and understanding how to keep windows dry is a must-have skill for every Canadian homeowner.

Windows ‘sweat’ during winter as indoor air cools against cold window glass and loses its ability to hold moisture. This excess water’s got to come out somewhere, and glass and window frames are excellent places for droplets of condensation to form.

315807334_f57641773e

Besides being a powerful trigger of mould growth, window condensation is also a signal that your home is suffering from inadequate ventilation. If enough excess moisture is being held inside your home to cause running window condensation, then it’s almost certain that your household air has more contaminants than it should, too.

That’s why many Canadians need to consider intentionally ventilating their homes in some way when window condensation begins to appear. There are two ways to do it.

Drafty homes that naturally leak lots of cold air never need intentional ventilation because enough fresh air comes inside on its own. That’s why you’ll never see window condensation in an old, cold farmhouse. But a leaky home is an expensive home to heat, and that’s why we’ve been building houses tighter and tighter for more than 40 years.

The easiest way to boost indoor air quality and reduce window condensation in a tight home is by opening windows a little and running exhaust fans more often in the bathroom and kitchen. For every cubic foot of stale air pushed outside by fans, another cubic foot of fresh air is drawn in through windows opened a little here and there. Do this enough to reduce window condensation and you’ll be healthier for it.

Adding fresh air into your home from outside while also retaining most of the heat invested in the stale air before it gets sent outside is what a heat recovery ventilator (HRV) is for. poor indoor air quality and window condensation is the most common home situation people ask for help about during winter.

If you’ve had excess window condensation in past winters, chances are good that you’ve got at least a little mould around window edges right now. Maybe a lot. Killing this mould is a good way to start the heating season because dormant mould can start growing again at lower moisture levels than would normally be required to trigger mould growth from a fresh start. Just don’t use bleach solutions for the job.

Bleach is the traditional way to kill mould, but according to the Occupational Health and Safety Administration (OSHA) in the U.S., “the use of a biocide, such as chlorine bleach, is not recommended as a routine practice during mould remediation.” Besides being toxic to people, bleach can’t properly kill mould roots on porous surfaces like drywall and wood. There are better options.

Stittsville Windows and doors Ottawa Window & Door Installation Area

Our Westend location in Ottawa, Stittsville Windows and Doors has completed window and door installations in Ottawa East, Ottawa West, Ottawa South, Orleans, Kanata, Barrhaven, Manotick, Carleton Place and Rockcliffe. Let us show you why we are one of the most trusted names in Ottawa Windows and doors! (613) 271-5434

Leave a Reply